Content on this page requires a newer version of Adobe Flash Player.

Get Adobe Flash player

Search by Products

UNIVERSAL SURFACE GAUGE

Series UL- 501
UNIVERSAL SURFACE GAUGE

• Used for marking & transferring measurement. 
• Ground base for accurate reference surfaces. 
• V groove on the front end which allows the spindle to 
   adjust to any angle above or below the base. 
• V groove in the base for cylindrical work. 
• A very positive fine adjustment through a rocker arm that  makes smooth &
   accurate setting. 
• Grooves on the side of the base for a sure & easy grip. 
• Dial indicator can also be used.
• Two gauge pins facilitate easy linear marking.

 

Sr.No.

Cat No.

Size 

Height

1.

UL- 50101

80 L x 65 w x 300 H  [12"]

300

2.

UL- 50102

100 L x 85 W x 450 H [18"]

450

3.

UL- 50103

110 L x 90 W x 600 H [24"]

600

 
 
 
 

HEAVY DUTY SURFACE GAUGE

Series UL- 502
HEAVY DUTY SURFACE GAUGE

• Used for marking & transferring measurement
• Base & Scriber are made from hardened steel
• Robust construction
• Fine adjestment for smooth & accurate setting
• Dial indicator can also be used

 

Cat No.

Base Size (mm)

Height of Column

UL - 50201

130 L x 105 W x 35 H

600 mm

UL - 50202

160 L x 130 W x 40 H

1000 mm
 
 
MICROMERTER STAND
Series UL- 838

• Micrometer Range : 300 - 1000 mm
• Type : Vertical
• Over all Length : 750 mm
• Over all Height : 1015 mm

 
 

HEAVY DUTY DIAL INDICATOR STAND

Series UL- 503
HEAVY DUTY DIAL INDICATOR STAND

• Used as holding device for dial indicator.
• Heavy & rigid construction.
• Column can move to & fro to full base length.
• Fine adjustment for accurate setting.
• Both faces of base can be used.

 

Cat No.

Base Size (mm)

Height of Column (mm)

Max. Horizontal Ext. (mm)

UL - 50301

250 L x 45 W

300

350

UL - 50302

300 L x 100 W

300

350

UL - 50303

300 L x 100 W

500

350

UL - 50304

350 L x 100 W

800

350

 
 
MAGNETIC BASES
Series UL- 504 (UL - 50401)
MAGNETIC BASES

• Used as holding device for dial indicator.
• Base V can be clamped to shaft of Ø 20 to Ø 120.
• Fine adjustment for accurate settings
• Powerful magnetic base holds firmly to ferrous surfaces vertically horizontally, upside - down
• ON - OFF facility.

 

Cat No.

Base Size (mm)

Overall height (mm)

Pull

UL - 50401

60 L x 50 W x 60 H

250
50 Kg
 
 
 
 
 
 
MAGNETIC BASES
Series UL- 504 (UL - 50403)
MAGNETIC BASES
• Used as holding device for dial indicator.
• Heavy & rigid construction.
• Base V can be clamped to shaft of Ø 20 to Ø 120
• Fine adjustment for accurate setting
• Can hold 8mm & 6mm stem diameter of dial
• Powerful magnetic base holds firmly to ferrous surfaces
• Vertically horizontally, upside-down 
• ON - OFF facility.
 

Cat No.

Base Size (mm)

Overall height (mm)

Pull

UL - 50403

56 L x 70 W x 70 H

220
70 Kg
 
 
 
MAGNETIC BASES
Series UL- 504 (UL - 50405)
MAGNETIC BASES
• Used as holding device for dial indicator.
• Heavy & rigid construction.
• Base V can be clamped to shaft of Ø 20 to Ø 120
• Fine adjustment for accurate setting
• Can hold 8mm & 6mm stem diameter of dial
• Two extension arms gives more flexibility in inspection
 

Cat No.

Base Size (mm)

Overall height

Main Shaft
Pull

UL - 50405

70 L x 48 W x 64 H

275 mm
Ø18 x 210 mm
70 Kg
 
 
 
 
MAGNETIC BASES
Series UL- 504 (UL - 50406)
MAGNETIC BASES
• Used as holding device for dial indicator.
• Push button type ON-OFF switch
• Can hold 8mm & 6mm stem diameter of dial
• Light duty dial stand
 

Cat No.

Base Size (mm)

Overall height (mm)

Main Shaft
Pull

UL - 50406

48 L x 42 W x 49 H

220 mm
Ø12.7 x 185 mm
40 Kg
 
 
 
 
MAGNETIC BASES
Series UL- 504 (UL - 50410)
MAGNETIC BASES
• Used as holding device for dial indicator.
• The magnetic base is directly mounted at the back of dial & this assembly can be clamped to any fixed position
 

Cat No.

Base Size (mm)

Pull

UL - 50410

Ø 56 x 20 T

10 Kg
 
 
 
MAGNETIC BASES
Series UL- 504 (UL - 50411)
MAGNETIC BASES

• Used as holding device for dial indicator.
• Base V can be clamped to shaft of Ø 20 to Ø 120.
• Strong magnetic field, so it can be clamped to any part vertically & horizontall
• ON - OFF facility.

 

Cat No.

Base Size (mm)

Overall height (mm)

Main Shaft

Pull

UL - 50411

64 L x 50 W x 60 H

230 mm

Ø12 x 150 mm

50 Kg
 
 
 
 
MAGNETIC BASES WITH FINE ADJUSTMENT
Series UL- 504 (UL - 50412)
MAGNETIC BASES WITH FINE ADJUSTMENT

• Used as holding device for dial indicator
• Heavy & rigid construction of base & column
• Base V can be clamped to shaft
• Fine adjustment for accurate setting
• ON - OFF facility

 

Cat No. 

Base Size (mm)

Overall Height

Main Shaft

Pull 

UL - 50412

60 L x 50 W x 60 H

230 mm

Ø12 x 150 mm

50 Kg

 
 
 
MINI UNIVERSAL CLAMPING MAGNETIC BASE - With Fine Adjustment
Series UL- 504 (UL - 50417)

UNIVERSAL CLAMPING MAGNETIC BASE - With Fine Adjustment

• Used as a holding device for dial indicator
• Heavy & rigid construction of base & column
• bearings are provided for easy working & rigid locking
• Can be locked to any position in 3600 by a Central lock
• Devetail slot for lever type dial
• Fine adjustment for accurate setting
• Can hold 8mm stem diameter of dial

 
Cat No.  Base Size (mm) Overall Height Pull
UL - 50417 35 L x 30 W x 35 H 190 mm 28 Kg
 
 
 
UNIVERSAL CLAMPING MAGNETIC BASE - Heavy Duty
Series UL- 504 (UL - 50416)

• Used as a holding device for dial indicator
• Heavy & rigid construction of base & column
• bearings are provided for easy working & rigid locking
• Can be locked to any position in 3600 by a Central lock
• Devetail slot for lever type dial
• Fine adjustment for accurate setting
• Can hold 8mm stem diameter of dial

 
Cat No.  Base Size (mm) Overall Height Pull
UL - 50416 70 L x 48 W x 64 H 445 mm 70 Kg
 
 
 
MAGNETIC BASE WITH FLEXIBLE ASSEMBLY
Series UL- 504 ( UL - 50413)
UNIVERSAL CLAMPING MAGNETIC BASE with fine adjustment

• Used as holding device for dial indicator.
• Heavy & rigid construction of base & column.
• Can be locked to any position in 360º by a Central lock.
• Dovetail slot for lever type dial.
• Fine adjustment for accurate setting.
• Base V can be clamped to shaft of Ø20 to Ø120.
• Can Hold 8mm stem diameter of dial.

 

Cat No. 

Base Size (mm)

Overall Height (mm)

Pull 

UL - 50413

70 L x 48  W x 64 H

330 mm

70 Kg

 
 
 
UNIVERSAL CLAMPING MAGNETIC BASE with fine adjustment
Series UL- 504 (UL - 50415)
UNIVERSAL CLAMPING MAGNETIC BASE with fine adjustment

• Used as holding device for dial indicator.
• Heavy & rigid construction of base & column.
• Can be locked to any position in 360º by a Central lock.
• Dovetail slot for lever type dial.
• Fine adjustment for accurate setting.
• Can Hold 8mm & 6mm stem diameter of dial.

 

Cat No. 

Base Size (mm)

Overall Height

Pull 

UL - 50415

60 L x   50 W x 60 H

320 mm

50 Kg

 
 
 
Centricator
Series UL- 504

• Can be locked to any position in 360° by a central lock
• Used as a holding device for dial indicator.
• Heavy & rigid construction of base & column.
• Center knob is of metal for extra life.
• Dovetail slot for lever type dial.
• Fine adjustment for accurate setting.
• Base V can be clamped to shaft of Ø20 to Ø120
• Can hold 8mm ( 6mm with sleeve ) stem diameter of dial.

 

Series Code

ARM Length L L1 L2

Overall Height (H+L)

Holding Stem

Remark

UL - 50418

290 mm
11.42"
110 mm
4.33"
101 mm
3.97"
350 mm
13.77"
DIA 8 mm
(0.31")
With Fine Adjustment & Dovetail Groove
UL - 50419 175 mm
6.89"
56 mm
2.20"
51 mm
2.00"
235 mm
9.25"
DIA 8 mm
(0.31")
With Fine Adjustment & Dovetail Groove
 
 
 
 
MAGNETIC TOOL SETTING GAUGE
Series UL- 505
MAGNETIC TOOL SETTING GAUGE

• Used with boring bar for presetting of cutting tool.
• Change in setting of the tool measures variation in bore 
dimension.
• Suitable clamp is provided for holding dial indicator
(for UL - 50504 & UL - 50505)
• Powerful magnet with ON-OFF facility.
• “V” is hardened & ground within 5 microns.
• The included angle of V is 90º. 
• Hardness 52 - 56 Rc.
• Also manufactured as per customer's requirement.

 

Sr.No. 

Cat No

Size (mm)

Slot (mm)

Range (mm)

1.

UL - 50501

72 L x 68 H x 35 T

14 x 2

Ø 25 - Ø 70

2.

UL - 50502

76 L x 75 H x 35 T

14 x 2

Ø 35 - Ø 90

3.

UL - 50503

80 L x 75 H x 40 T

14 x 2

Ø 40 - Ø 105

4.

UL - 50504

100 L x 85 H x 40 T

14 x 2

Ø 40 - Ø 125

5.

UL - 50505

120 L x  90 H x 40 T

14 x 2

Ø 110 - Ø 180

 
 
 
MAGNETIC TOOL SETTING GAUGE
Series UL- 505
MAGNETIC TOOL SETTING GAUGE

• Used with boring bar for presetting of cutting tool.
• Change in setting of the tool measures variation in bore dimension.
• Suitable clamp is provided for holding dial indicator.
• Powerful magnet with ON-OFF facility.
• “V” is hardened & ground within 5 micron.
• The included angle of V is 120º.
• Hardness 52 - 56 Rc. 
• Also manufactured as per customer's requirement.

 

Sr.No. 

Cat No

Size (mm)

Range (mm)

1.

UL - 50506

60 L x60 H x30 T

Ø 10 - Ø 50

2.

UL - 50507

80 L x 80 H x 30 T

Ø 10 - Ø 90

3.

UL - 50508

100 L x 100 H x 35 T

Ø 10 - Ø 110

 
 
 
MAGNETIC TOOL SETTING GAUGE
Series UL- 506
MAGNETIC TOOL SETTING GAUGE

• Used with boring bar for presetting of cutting tool
• Change in setting of the tool measures variation in bore dimension.
• Powerful magnet without ON-OFF facility.
• “V” is hardened & ground within 5 micron.
• The included angle of V is 120º.
• Hardness 52 - 56 Rc.
• Also manufactured as per customer's requirement

 

Sr.No. 

Cat No

Size (mm)

Range (mm)

1.

UL - 50601

100 L x 50 H x25 T

Ø 20 - Ø 90

2.

UL - 50602

110 L x 45 H x 22 T

Ø20 - Ø 75

3.

UL - 50603

90 L x 40 H x 22 T

Ø 45 - Ø 100

 
 
 
KNIFE-EDGE STRAIGHT EDGE
Series UL- 601
KNIFE-EDGE STRAIGHT EDGE

• Used for checking flatness & straightness of surfaces.
• All accuracies as per IS : 3512 - 1966.
• Made from high quality tool steel.
• Knife edge provides an excellent visual line contact with the work piece.
• Hardness 60 ± 2 Rc.
• Packed in individual wooden box.

 

Sr.No. 

Cat No

Size (mm)

1.

UL-60101 

50 L x 30 W x 8 T [ 2” ]

2.

UL-60102 

75 L x  35 W x 8 T [ 3” ]

3.

UL-60103

100 L x 40 W x 10 T [ 4” ]

4.

UL-60104

150 L x 40 W x 10 T [ 6” ]

5.

UL-60105

200 L x 50 W x 12 T [ 8” ]

6.

UL-60106

250 L x 50 W x 12 T [ 10” ]

7.

UL-60107 

300 L x 60 W x 12 T [ 12” ]

8.

UL-60108 

500 L x 60 W x 15 T [ 20” ]

9.

UL-60109

600 L x 60 W x 20 T [ 24” ]

 
 
 
STEEL STRAIGHT EDGE
Series UL- 602
STEEL STRAIGHT EDGE

• Used for checking flatness & straightness of surfaces.
• Made from high quality tool steel.
• Hardness 60 ± 2 Rc. 
• Plastic head insulator.
• Packed in individual wooden box.

 

Sr.No. 

Cat No

Size (mm)

Accuracy Micron

1.

UL-60201

100 L X 15 H X 5 T [4"]

6

2.

UL-60202

 160 L X 20 H X 8 T [6"]

6

3.

UL-60203 

300 L X 35 H X 12 T [12"]

7

4.

UL-60204 

500 L X 50 H X 15 T [20"]

7

5.

UL-60205

800 L X 80 H X 20 T [32"]

10

6.

UL-60206

1000 L X 100 H X  20 T [40"]

12
7.
UL-60207
1500 L X 100 H X  20 T [60"]
18
 
 
 
 
PRECISION ANGLE PLATES 
Series UL- 308
PRECISION ANGLE PLATES 

• These angle plates are invaluable for accurate work in
   Tool room, right angle machining & grinding. 
• Made from single piece high quality alloy steel. 
• Accuracy for Square ness, Flatness & Parallelism Within 0.007 mm. 
• Hardness - 60 ± 2 Rc. 
• Unique design to hold small cylindrical parts also. 
• M6 & M8 tapped holes for clamping. 
• Three clamps provided for different clamping.

 
Sr.No.
Cat No.
Size (mm)
1.
UL-30801 
100 x 100 x 115
 
 
 
 
PRECISION ANGLE PLATE
Series UL- 309
PRECISION ANGLE PLATE

• These angle plates are invaluable for accurate work in
   Tool room, right angle machining & grinding. 
• Made from single piece high quality alloy steel. 
• Accuracy for Square ness, Flatness & Parallelism is
  within 0.010mm upto 150L & within 0.015mm upto 300L. 
• M6 & M8 tapped holes or slots are provided for clamping. 
• Hardness - 60 ± 2 Rc.

• Slotted Angle Plate On Request.

 
Sr.No.
Cat No.
Size (mm)
1.
UL-30901 
115 x 150 x 150 
2.
UL-30902
150 x 150 x 150 
3.
UL-30903
150 x 150 x 225 
4.
UL-30904
150 x 225 x 300 
 
 
 
 
TRY - SQUARE Flat Edge Without Stock
Series UL- 603
TRY - SQUARE Flat Edge Without Stock

• Used for checking Squareness & straightness. 
• All accuracies as per IS : 2103 - 1980.
• Made from single piece high quality tool steel. 
• Hardness 60 ± 2 Rc. 
• A groove on the inner corner of the stock, aids in the clearance of burr or dirt.
• Packed in individual wooden box. 

 

Sr.No. 

Cat No

Size (mm)

1.

UL-60301 

50 L x 30 W x 4 T [ 2” ]

2.

UL-60302 

75 L x 50 W x 4.5 T [ 3” ]

3.

UL-60303

100 L x 70 W x 5 T [ 4” ]

4.

UL-60304

150 L x 100 W x 6 T [ 6” ]

5.

UL-60305

200 L x140 W x7 T [ 8” ]

6.

UL-60306

250 L x165 W x 8 T [ 10” ]

7.

UL-60307 

300 L x 200 W x8 T [ 12” ]

8.

UL-60308 

400 L x 250 W x 10 T [ 16” ]

 
 
 
 
BEVELLED EDGE TRY - SQUARE IS : 2103 - 1980
Series UL- 604
BEVELLED EDGE TRY - SQUARE

• Used for checking Square ness & straightness.
• Made from single piece high quality tool steel.
• Inner & outer edges of blade are bevelled at 60º angle.
• Beveled edge provides an excellent visual line contact  with the workpiece. 
• Hardness 60 ± 2 Rc.
• A groove on the inner corner of the stock, aids in the  clearance of burr or dirt.
• Packed in individual wooden box.

 

Sr.No. 

Cat No

Size (mm)

1.

UL-60401 

50 L x 35 W x 4 T [ 2” ]

2.

UL-60402 

75 L x 50 W x 4.5 T [ 3” ]

3.

UL-60403

100 L x 70 W x 5 T [ 4” ]

4.

UL-60404

150 L x 100 W x 6 T [ 6” ]

5.

UL-60405

200 L x140 W x7 T [ 8” ]

6.

UL-60406

250 L x165 W x 8 T [ 10” ]

7.

UL-60407 

300 L x 200 W x8 T [ 12” ]

8.

UL-60408 

400 L x 250 W x 10 T [ 16” ]

 
 
 
STOCK TRY - SQUARE
Series UL- 605
STOCK TRY - SQUARE

• Used for checking Squareness & straightness.
• All accuracies as per IS : 2103 - 1980.
• Made from single piece high quality tool steel. 
• Hardness 60 ± 2 Rc. 
• A groove on the inner corner of the stock, aids in the clearance of burr or dirt.
• Packed in individual wooden box. 

 

Sr.No. 

Cat No

Size (mm)

1.

UL-60501 

100 L x 70 W x 10 T [ 4” ]

2.

UL-60502 

150 L x 100 W x 12 T [ 6” ]

3.

UL-60503

200 L x140 W x 15 T [ 8” ]

4.

UL-60504

250 L x 165 W x 20 T [ 10” ]

5.

UL-60505

300 L x200 W x20 T [ 12” ]

6.

UL-60506

400 L x250 W x 25 T [ 16” ]

7.

UL-60507 

500 L x 300 W x 25 T [ 20” ]

8.

UL-60508 

700 L x450 W x 30 T [ 28” ]

9.

UL-60509

1000 L x750 W x 40 T [ 40” ]

 
 
 
 
FLANGED BEAM TRY - SQUARE
Series UL- 606
FLANGED BEAM TRY - SQUARE

• Used to check Squareness & straightness. 
• Accuracy for Squareness & Flatness is within ±0.010 mm. / 150H.
• Made from single piece high quality tool steel.
• Inside & outside are accurate right angles.
• A groove on the inner corner of the stock, aids in the clearance of burr or dirt. 
• Hardness 60 ± 2 Rc. 
• Packed in individual wooden box. 

 

Sr.No. 

Cat No

Beam Size (mm)

Cross Section (mm2)

1.

UL-60601 

100 x 70

20 x 5

2.

UL-60602 

150 x 100

26 x 6

3.

UL-60603

200 x 130

32 x 7 

4.

UL-60604

300 x 200

40 x 8

 
 
 
MAGNETIC TRY - SQUARE
Series UL- 607
MAGNETIC TRY - SQUARE

• Used to check Squareness & straightness. 
• Made from high quality tool steel.
• Packed in individual box. 

 

Cat No

Beam Size (mm)

UL-60701

200 L X 50 W X 60 H

 
 
 
 
TRISQUARE PERMANENT MAGNETIC
Series UL- 811
TRISQUARE PERMANENT MAGNETIC

• Aluminium body with Fixed right angle
• Keeps hands free during welding of two sheets
• Suitable for right angle
• To used in fabrication & welding
• used in Machine shop for marking inspection or welding

 

Cat No

Size (mm)

UL-81101

130 L x 37 W x 130 H

UL-81102

150 L x 50 W x 150 H

UL-81103

160 L x 50 W x 160 H

UL-81104

200 L x 50 W x 200 H

 
 
 
PLATE TYPE MAGNETIC SEPARATOR
Series UL- 208
PLATE TYPE MAGNETIC SEPARATOR

• Used for lifting & handling of ferromagnetic particies
• Strong magnetic field to lift large quantity of particles
• Particles are detached by separating lower plate form upper magnetic body

 

Cat No

Size (mm)

UL-20801

125 L x 175 W x 30 H

 
 
 
PERMANENT MAGNETIC SWEEPER
Series UL- 209
PERMANENT MAGNETIC SWEEPER

   
• Used for collecting ferrous particles & scrap from floor space.
• Good quality strong magnets are used.
• Wheels for easy movement on floor.
• Particles are released just by creating gap between bottom plate & magnetic assembly by using foot.
• Long handle for easy working.
 

Sr.No. 

Cat No

 Size (mm)

1.

UL-20901

300 x 150

2.

UL-20902 

450 x 150 

3.

UL-20903

600 x 150

 
 
 
HEAVY DUTY PERMANENT MAGNETIC SWEEPER
Series UL- 211
HEAVY DUTY PERMANENT MAGNETIC SWEEPER

• Used for collecting ferrous particles & scrap from floor space.
• Good quality strong magnets are used.
• Wheels for easy movement on floor.
• Can lift the job from 150mm
• Useful for the shop floor & scrap yard.
• Hydraulic jack for easy releasing.

 

Sr.No. 

Cat No

 Size (mm)

1.

UL-21101

450 x 300

2.

UL-21102

600 x 300 

3.

UL-21103

900 x 300

 
 
 
MAGNETIC SWEEPER FORKLIFT OPERATED
Series UL- 812
MAGNETIC SWEEPER FORKLIFT OPERATED

• Used for lifting & handling of ferromagnetic particles
• Strong magnetic field to lift large quantity of particles
• Particles are detached by separating lower plate form upper magnetic body
• Magnetic Sweeper can fit to any forklift

 

Sr.No. 

Cat No

 Size (mm)

1.

UL-81201

800 x 260

2.

UL-81202

1000 x 260

3.

UL-81203

1200 x 260