Content on this page requires a newer version of Adobe Flash Player.

Get Adobe Flash player

 
 

MAGNETIC CLAMPING BLOCK

Series UL- 612
MAGNETIC CLAMPING BLOCK

• Suitable for drilling & light machining.
• Easy to operate.
• Time saving as machincal clamps are avoided.
• Economical for operation & maintenance.
• Powerful holding with the magnet.
• Vertical lifting force is 35 to 40 kg per cm sq.

 
Sr.No.
Cat No.
Size (mm)
1.
UL-61201
120L x 85w x 130H
 
 
 
 

MAGNETIC STICKS

Series UL- 203
MAGNETIC STICKS

• Used for removing ferrous chips or particles from blind or taping holes, corners or slots of machine table.
• Compact design, uses strong magnets
• Magnet depth is 20 mm from one end
• Stainless steel body to avoid corrosion.
• Special sizes can also be manufactured.
• Magnetic stick with handle is also available

 
Sr.No.
Cat No.
Size (mm)
1.
UL-20301 
Ø 3 x 150 L 
2.
UL-20302 
Ø 5 x 150 L
3.
UL-20303 
Ø 6 x 150 L 
4.
UL-20304 
Ø 8 x 150 L
5.
UL-20305 
Ø 10 x 150 L
6.
UL-20306
Ø 12 x 150 L 
7.
UL-20307
Ø 14 x 150 L 
8.
UL-20308 
Ø 15 x 150 L
9.
UL-20309 
Ø 16 x 150 L
10.
UL-20310
Ø 18 x 150 L 
 
 
 
 

MAGNETIC SEPARATOR ON OFF TYPE

Series UL- 813
   


•  Easily clean up sharp edged drill chips screw and other metal parts
•  Items are safety ejected by pulling the back side knob
•  Ideal for hard to each space
•  Used in all fabrication shop and machine shop
•  No requirement of hand contact with scrap to handle, so safe in use
 
 

Sr.No 

Cat No. 

Size (mm)

1.

UL - 81301

Ø1 x 6 Inch

 
 
 
MAGNETIC SEPARATOR
Series UL- 701
   
MAGNETIC SEPARATOR
   
• Used for removing or collecting fine ferrous or ferromagnetic contaminants from oil tank or coolant tank.
• Powerful magnet allows large collection of particles. 
• Stainless steel body for rust prevention. 
• Handle or eye bolt on top for easy handling. 
• Available in different diameter & length. 
 
Sr. No.
Cat No.
Dia (inch.)
Length (inch.)
1.
UL-70101
1"
4, 5 , 6, 7, 8
2.
UL-70102
2"
6, 8, 10, 12, 14
3.
UL-70103
4"
6, 8, 10, 12, 16
4.
UL-70104
6"
8, 16, 24, 30, 36
 
 
 
 
ELECTRO PERMANENT MAGNETIC CHUCKS
Series UL- 613
Magnetic Diamond Dresser Holder

• "ULTRA" Magnetic Diamond Dresser Holder
• Small & compact size
• Powerful holding of the magnet on the machine table.
• Easy holding of the diamond dresser

 
Cat No.
Size (mm))
Magnetic Pull
UL-61301 
70L x 48 W x 64 H
70 Kg.
 
 
 
 
DIAMOND DRESSER
Series UL- 614
DIAMOND DRESSER

• "ULTRA" Diamond Dresser Holder
• Small & compact size
• Easy holding of the diamond dresser 
• to be used on grinding machine with magnetic chuck
• Hardened & ground

 
Cat No.
Size (mm))
UL-61401
70 L x 70 W x 50 H
 
 
 
MAGNETIC TELESCOPIC PEN
Series UL- 833

MAGNETIC TELESCOPIC PENMAGNETIC TELESCOPIC PEN

• Used for removing ferrous chips or particles from blind or tapping holes,
   corners or slots of machine table
• Compact design, uses strong magnets

 
Sr. No.
Cat No.
Size (mm))
1. 
UL-83301
Ø 6 x 130 L - 640 mm
 
 
 
MAGNETIC TELESCOPIC TORCH
Series UL- 832

MAGNETIC TELESCOPIC TORCH

• Used for removing ferrous chips or particles from blind or tapping holes,
   corners or slots of machine table
• Compact design, uses strong magnets

• LED Light Provided at one end

 
Sr. No.
Cat No.
Size (mm))
1. 
UL-83201
Ø 20 x 175 L - 540 mm
 
 
 
PERMANENT MAGNETIC CHUCK
Series UL- 708
PERMANENT MAGNETIC CHUCK (HEAVY DUTY) 

• PERMANENT MAGNETIC CHUCK (HEAVY DUTY)
• Holding device for surface grinding machine, Tool & cutter grinder, Spark erosion machines
• Accuracy as per IS : 4816 - 1987
• Assembled with powerful Magnets
• Poles individually magnetized for full loading power
• Magnetic pull is 40-70% more than IS specification
• Bottom plate has suitable extension to clamp on table
• Easy operated ON-OFF lever

 
Sr.No.
Cat No.
Size
Ploe Gap (mm)
Pole Pitch (mm)
1
UL-70803
200 L x 100 W x 60 H
16
32
2
UL-70804
200 L x 150 W x 60 H
19
32
3
UL-70805
250 L x 150 W x 60 H
19
35
4
UL-70806
300 L x 150 W x 60 H
19
35
5
UL-70807
300 L x 200 W x 65 H
19
35
6
UL-70808
350 L x 150 W x 65 H
19
35
7
UL-70809
400 L x 150 W x 65 H
19
35
8
UL-70810
450 L x 150 W x 65 H
19
35
9
UL-70811
450 L x 200 W x 70 H
19
35
10
UL-70812
500 L x 200 W x 70 H
19
35
11
UL-70813
600 L x 200 W x 70 H
19
35
12
UL-70814
450 L x 250 W x 70 H
19
35
13
UL-70815
450 L x 300 W x 70 H
19
35
14
UL-70816
600 L x 250 W x 70 H
19
35
15
UL-70817
600 L x 300 W x 70 H
19
35
16
UL-70818
750 L x 250 W x 70 H
19
35
 
 
 
PERMANENT MAGNETIC CHUCKS
Series UL- 709
PERMANENT MAGNETIC CHUCK CLOSE POLE TYPE (HEAVY DUTY)

• PERMANENT MAGNETIC CHUCK CLOSE POLE TYPE (HEAVY DUTY)
• Holding device for surface grinding machine, Tool & cutter grinder, Spark erosion machines & also for light milling. 
• The working face & bottom face are perfectly parallel. 
• Assembled with powerful Magnets. 
• Poles individually magnetized for full loading power. 
• Magnetic pull is 40-70% more than IS specification. 
• Bottom plate has suitable extension to clamp on table. 
• Better magnetic grip due to close poles. 
• Suitable to hold thin & small jobs. 
• Easy operated ON-OFF lever.

 
Sr. No.
Cat No.
Size
Ploe Gap (mm)
Pole Pitch (mm)
1.
UL-70901 
250 L x 150 W x 65 H 
14
30
2.
UL-70902 
300 L x 150 W x 65 H 
14
30
3.
UL-70903 
300 L x 200 W x 65 H 
14
30
4.
UL-70904 
350 L x 150 W x 65 H 
14
30
5.
UL-70905 
400 L x 150 W x 65 H 
14
30
6.
UL-70906 
450 L x 150 W x 70 H 
14
30
7.
UL-70907 
450 L x 200 W x 70 H 
14
30
8.
UL-70908 
500 L x 200 W x 70 H 
14
30
9.
UL-70909 
600 L x 200 W x 70 H 
14
30
10.
UL-70910
450 L x 250 W x 70 H 
14
30
11.
UL-70911
450 L x 300 W x 70 H 
14
30
12.
UL-70912
600 L x 250 W x 70 H 
14
30
13.
UL-70913
600 L x300 W x 70 H 
14
30
14.
UL-70914
750  L x 250 W x 70 H 
14
30
 
 
 
MICRO FINE PITCH PERMANENT MAGNETIC CHUCK
Series UL- 721
MICRO FINE PITCH PERMANENT MAGNETIC CHUCK

• Holding device for surface grinding machine, Tool & cutter
grinder, Spark erosion machines.
Fine Pitch (1 + 0.5) makes it suitable to hold very thin & small jobs.
• The working face & bottom face is perfectly parallel.
• Poles individually magnetized for full loading power.
• Suitable to hold thin & small jobs.
• Bottom plate has suitable extension to clamp on table.
• Better magnetic grip due to close pole.
• Easy operated ON-OFF lever

 
Sr. No.
Cat No.
Size (mm)
Pole Pitch (mm)
1
UL 72101
250 L x 150 W x 60 H
1.5
2
UL 72102
300 L x 150 W x 60 H
1.5
3
UL 72103
350 L x 150 W x 60 H
1.5
4
UL 72104
400 L x 150 W x 60 H
1.5
5
UL 72105
450 L x 150 W x 60 H
1.5
 
 
 
ROUND MAGNETIC CHUCK
Series UL- 710
ROUND MAGNETIC CHUCK

• Holding device for Rotary surface grinding and also for Lathe & cylindrical grinding machines.
• Accuracy as per IS : 4816- 1987
• Magnetic pull is 20-40% more than IS specification.
• Assembled with powerful Magnets.
• On-Off by key

 
Sr. No.
Cat No.
Size (mm)
Pole Gap (mm)
1
UL 72102
Ø 150 x 60 H
14
2
UL 72103
Ø 160 x 60 H
16
3
UL 72104
Ø 175 x 60 H
16
4
UL 72105
Ø 200 x 60 H
16
5
UL 72106
Ø 225 x 65 H
16
6
UL 72107
Ø 250 x 60 H
19
7
UL 72108
Ø 300 x 70 H
19
8
UL 72109
Ø 375 x 70 H
19
9
UL 72110
Ø 400 x 70 H
19
10
UL 72111
Ø 450 x 70 H
19
 
 
 
SPECIAL TYPE CIRCULAR MAGNETIC CHUCK 
Series UL- 710
SPECIAL TYPE CIRCULAR MAGNETIC CHUCK 

• Holding device for Rotary surface grinding, light machining, also for Lathe & cylindrical grinding machines.
• The working face & bottom face is perfectly parallel.
• Assembled in powerful Rare Earth Magnets.
• Suitable for thin & small jobs.
• “V” construction design gives better magnetic force.
• Easy operated ON-OFF knob.

 
Sr.No.
Cat No.
Size (mm)
1.
UL-71012
Ø 75 x 60 H  [3"]
2.
UL-71013
Ø 100 x 60 H  4"]
3.
UL-71014
Ø 150 x 60 H  [6"]
4.
UL-71015
Ø 200 x 60 H  [8"]
 
 
 
MAGNETIC BLOCK
Series UL- 611
MAGNETIC BLOCK

Both side can hold work pieces & can be turn ON-OFF individually
• They are shear to the work table by turning ON-OFF magnet
• The side face can also hold work piece
• Light Weight for easy positional adjustment.
• Removable On-OFF Handle.
Suitable for grinding machine & EDM Machine.

 
Cat No.
Size (mm)
UL-611101
150 L x 50 W x 50 H
 
 
 
TRANSFER BLOCKS
Series UL- 711
TRANSFER BLOCKS

• Used as an accessory for magnetic chuck to clamp thin & odd shaped jobs.
• Simplest method of extending the magnetic flux of magnetic chuck with parallel poles to support the job.
• Maximum flux transformation when placed parallel to pole lines.
• Perfectly ground within 5 Micron & supplied in matched pair.

 
Sr.No.
Cat No.
Size (mm)
1.
UL-71101
50 L x 35W x 100 H
2.
UL-71102
60 L x 30W x 75 H
3.
UL-71103
50 L x 75W x 75 H
4.
UL-71104
50 L x 50 W x 100 H
5.
UL-71105
80 L x25W x 120 H
6.
UL-71106
60 L x 25W x 100 H
7.
UL-71107
50 L x 20W x 100 H
 
 
 
 
V TYPE TRANSFER BLOCKS
Series UL- 712
V TYPE TRANSFER BLOCKS

• Used as an accessory for magnetic chuck to clamp thin & odd shape jobs.
• Simplest method of extending the magnetic flux of magnetic chuck with parallel poles to support the job.
• Maximum flux transformation when placed parallel to pole lines.
• 90º V provided for round job. 
• Perfectly ground within 5 micron & supplied in matched pair.

 
Sr.No.
Cat No.
Size (mm)
1.
UL-71201
50 L x 60W x 45 H
2.
UL-71202
110 L x 60W x 45 H
3.
UL-71203
75 L x 65W x 35 H
4.
UL-71204
100 L x 65 W x 35 H
5.
UL-71205
60 L 60W x 45 H