"ULTRA" Brand Hardened Magnetic "V" Blocks : Series UL - 320

All Sides Are Hardened & Ground.


Sr. No. Cat No. Size ( L x W x H )
( mm / inch )
Range of Shaft
( mm / inches )
Pull Force
( kgf )
Accuracy*
( mm / inches )
1. UL-32001 Hard 45L x 40W x 55H ( 2" ) DIA 3 - 25mm ( DIA 0.12-1" ) 30 kgf 0.005mm ( 0.0002" )
2. UL-32002 Hard 75L x 56W x 75H ( 3" ) DIA 5 - 40mm ( DIA 0.2-1.57" ) 85kgf 0.005mm ( 0.0002" )
3. UL-32003 Hard 100L x 70W x 95H ( 4" ) DIA 5 - 65mm ( DIA 0.2-2.56" ) 150 kgf 0.005mm ( 0.0002" )
4. UL-32004 Hard 150L x 75W x 100H ( 6" ) DIA 5 - 70mm ( DIA 0.2-2.75" ) 190 kgf 0.006mm ( 0.00024" )
5. UL-32005 Hard 200L x 125W x 150H ( 8" ) DIA 10 - 140mm ( DIA 0.4-5.51" ) 400 kgf 0.012mm ( 0.00047" )
6. UL-32006 Hard 160L x 125W x 130H ( spl 6" ) DIA 5 - 140mm ( DIA 0.2-5.51" ) 220 kgf 0.012mm ( 0.00047" )
*Accuracy of Parallelism, Squareness in Matched Pair
magnetic-v-blocks

magnetic-v-blocks
Magnetic V Blocks
Magnetic V Blocks

Comparison between Ultra brand Hardened V Block and other brand Hardened V Block

Magnetic V Blocks
Magnetic V Blocks

Due to All sides hardened you will get 40% better life as compared to with ordinary blade and bit pasted hardened V blocks & Double the life than Soft V Blocks.

request-quote

"ULTRA" Brand Magnetic "V" Blocks ( Soft ) : Series UL - 101

  • Used for Grinding, Light Milling, Drilling & Inspection of Round & Square Jobs.
  • Accuracy for Flatness, Squarness and Parallelism within 0.005mm upto 150 mmL & 0.010 mm for 200 mmL of "V" block.
  • Uniform and strong magnetic pull to all three magnetic surfaces Top, Bottom & V face.
  • Easy ON - OFF facility.
  • All sides are soft.

Cat No. Size (mm) Range (mm) Pull
UL-10101 45H x 40H x 55H DIA 3 - 25mm ( DIA 0.12-1" ) 30 kgf
UL-10102 75L x 56W x 75H DIA 5 - 40mm ( DIA 0.2-1.57" ) 85kgf
UL-10103 100L x 70W x 95H DIA 5 - 65mm ( DIA 0.2-2.56" ) 150 kgf
UL-10104 150L x 75W x 100H DIA 5 - 70mm ( DIA 0.2-2.75" ) 190 kgf
UL-10105 200L x 125W x 150H DIA 10 - 140mm ( DIA 0.4-5.51" ) 400 kgf
Magnetic V Blocks (Soft) request-quote